When your garage door starts acting up, more often than not it is telling you it's time to do a bit of maintenance. So, before hitting the panic button, try these simple repairs. First, examine the rollers and tracks. If you can't remember the last time you cleaned them (and they look the part!), give them a good brushing and then add some lubricant. Next, perform these simple garage door maintenance tasks.
Many garage door openers can be purchased with lighting features. The lighting features can be for security reasons or simply for light in the garage. The light is mounted right on the motor housing and will turn on when you use the opener. The light will stay on for approximately 15 to 30 seconds after the garage door is closed, but can also be turned on using a remote control or a wall-mounted switch. If your garage door opener does not come with lighting features, you can have them installed for roughly $50-$100. If you need to replace the light in the lighting fixture, a light bulb will cost $10-$15. You may need to hire an electrician for installation if the wiring is not in place. The cost to hire an electrician is $65-$85 per hour, and this process will only take an hour.
Another way to control the opening and closing of your garage door is using a keypad. This is a great way to get into the garage without having to worry about having your key or remote control. Key pads are often installed on the outside of the garage door on the wall. Keypads are controlled using a PIN number that you enter using the touchpad. You can do this to open and close the garage. You can even create temporary PINs for giving access to your repair workers, delivery men, or even neighbors, for a keyless entry. Keypads can be purchased separately from a garage door opener. Keypads for garage doors average in price between $25-$70.
Looking for a distinctive overhead door? At PK Garage Door, we have the one to fit your specific needs. In the garage door industry for over 30 years, we know all their ins and outs. What sets us apart from our competition? Our personalized customer service! For us, every customer is unique, just like their needs. Because we work exclusively with top quality products, we carry Garaga as our garage door line. 
If you can’t find one for your garage door opener model, you can try a universal remote or you can install a new receiver. A receiver replaces the radio frequency the opener uses with its own. An added bonus of a new receiver is that it will automatically update older openers to the new rolling code technology, which stops the bad guys from stealing your code. Just plug the new receiver into an outlet close to the opener, and run the two wires provided to the same terminals the wall switch is connected to.

When you pull up to your garage door and push the button for the opener, there’s one thing that should happen: your garage door should open smoothly, steadily, and quietly. However, if that’s not happening, contact the friendly professionals at Garage Door Service. We’re located in Loveland, Colorado, but we’re also prepared to offer service, garage door repair, and garage door opener repair to customers in Fort Collins, Windsor, and all over Northern Colorado, as well as Wyoming, Nebraska, and Kansas. No matter the problem, our technicians always come prepared with a wide range of parts and tools, so that we can repair your garage door during a single visit. We’re committed to providing reasonable rates, free estimates, and top-notch customer service. Our goal is to leave you with a working garage door and a smile.
Step 5: Check for loose hardware, and tighten as needed. On swing-up doors, check the plates where the spring is mounted to be sure the screws are tight, and tighten any loose screws. On roll-up doors, check the hinges that hold the sections of the door together; tighten any loose screws, and replace any damaged hinges. Sagging at one side of the door can often be corrected by servicing the hinges. If a screw hole is enlarged, replace the screw with a longer one of the same diameter, and use a hollow fiber plug, dipped in carpenters' glue, with the new screw. If the wood is cracked at a hinge, remove the hinge and fill the cracks and the screw holes with wood filler. Let the filler dry and then replace the hinge. If possible, move the hinge onto solid wood.
Hello, I too have a Lennox pellet stove, the Eilite mase in 2008. Ours hasn't been professionally cleaned ever. And now it has built up with dust and in the different compartments in the two side panels such as the blowes, motors, and switches. Now when we run it, it will start up and run fine for about 20 minutes and then shuts down. Today I got it to run for 3 hours and then it stopped feeding pellets. I've cleaned out the hooper with a shop vac, vaccummed thoroughly inside the stove, and wiped the visible and reachable dust, but it still isn't working properly. Did you find out any information about your stove. I'm having trouble finding DIY videos for this brand.

Measure the various areas where the door will be installed: door-opening height and width, headroom (from top of opening to ceiling), and back room (length of garage). For the headroom, you should have about 10" to 12" of space, depending on the spring system you're installing. For the back room, you should have the door height, plus another 18" or more of space.
I had Russ out to my house on July 16th for a simple motor replacement. While he was inspecting my door, he found several significant cracks. He took the time to point them out to my husband and advised that we really need a new door along with the motor. The following day Craig came out to do an estimate. He was so polite and professional, very no nonsense, and didn't try to sell us anything we don't need. He came back again on the 19th and took measurements, we signed a contract, and are scheduled to get our new door and motor on the 25th. We have had issues with our door not opening or closing all the way for the last 4 years during the summer heat. It will be so nice to have peace of mind that our garage door and the motor will last a very long time. I truly appreciate the honesty and integrity of your technicians! Thank you!

When you're done watching this video you'll know how to determine whether the company you hired to replace your garage door spring installed the right size spring on your door. You'll also learn the consequences to your garage door opener if the wrong size spring is used. If you are having a problem with your garage door spring, the 2:30 minutes you spend watching this video is time will spent.
If you can’t find one for your garage door opener model, you can try a universal remote or you can install a new receiver. A receiver replaces the radio frequency the opener uses with its own. An added bonus of a new receiver is that it will automatically update older openers to the new rolling code technology, which stops the bad guys from stealing your code. Just plug the new receiver into an outlet close to the opener, and run the two wires provided to the same terminals the wall switch is connected to.
When it comes to garage doors, Jarusewski’s Overhead Door Service Inc. is your premiere choice. We are true professionals and your satisfaction is key. Let us show you the quality of our garage doors and how you can improve both the look and value of your home or business. From the appearance of the door, right down to strength and durability, we’ve got a door for everyone.
We are a family owned company with over 20 years of professional experience in garage door repair. We are constantly working to keep our intensive training up-to-date so that our uniformed technicians are ready to assist you with any garage door concerns, and so that you can always expect the finest quality of service to meet your needs and your budget. For the best technicians and the best repairs for your home garage door, look no further. Contact us today for great results at a fraction of the cost.
With over 300 independently moving parts, your garage door is a deceptively complex piece of equipment. To help prevent malfunctions and break-downs, it is a good idea to occasionally perform a garage door tune-up to keep all of these parts in good working order. A regular tune-up service by a Sears professional can prevent unexpected door problems and prolong the life of your existing equipment.
Precision has been my choice for all garage door needs for years. You all provide quality products and service. You arrive when you say you’re going to. And you’ve always had everything in the work vehicle that was needed. This time, what I thought was wrong was the electronic eye bcs the door wouldn’t shut. I cleaned it of dust and spider webs but it didn’t work. That was only part of the issue. The electronic display had a code rather than the time. It meant the springs wer
The history of the garage door could date back to 450 BC when chariots were stored in gatehouses, but in the U.S. it arose around the start of the 20th century. As early as 1902, American manufacturers—including Cornell Iron Works—published catalogs featuring a "float over door." Evidence of an upward-lifting garage door can be found in a catalog in 1906.[4]
×